您好,欢迎访问本站博客!登录后台查看权限
  • 如果您觉得本站非常有看点,那么赶紧使用Ctrl+D 收藏吧
  • 网站所有资源均来自网络,如有侵权请联系站长删除!

Hddlab Sea 2.5”Slim Set Tools 2H&4H Seagate LM Slim HDD Head Comb Suite.Standard

HDD Tools Shop admin 2018-07-23 1034 次浏览 0个评论
网站分享代码

Product Description

Hddlab Sea 2.5" Slim set represents a pair of head replacement tools which can be used to safely and easily replace heads on the Seagate 2.5" slim hard drives with 1-2 platters which park their read/write headson a ramp.

The set tools contains:

ST slim 2H: This head replacement tool can be used on 2.5” Seagate slim hard drive models which have 1 platter and with their heads parked on a ramp.

ST slim 4H:This head replacement tool can be used on 2.5Seagate slim hard drive models which have 2 platters and with their heads parked on a ramp.


Hddlab Sea 2.5Slim Set Tools models

ST 2.5slim 2H


ST 2.5slim4H

ST500LM030

ST1000LM035

ST1000LM037

ST1000LM038

ST1000LM048

ST2000LM007

ST2000LM009

ST2000LM010

ST2000LM015

 

Introduction:


This guide is intended as a short course in handling of our tools for professionals indata recovery. It is assumed that the user is experienced in data recovery and familiar with"traditional" ways of saving data. This manual should not be taken as a guide for training.

Using these tools without adequate software support is not recommended. 

It isrecommended to use some of the proven systems for cloning,such as MRT,PC3000,DFL,Salvation DataCopy-r and other products.

It is possible to recover data without HDDLAB tools. In many cases, the knownprocesses of hard drive head replacement are effective and sufficient. The general ideabehind HDDLAB tools was to make sure that the process of replacing damaged harddrive heads goes with no errors. The use of HDDLAB tools prevents the ferromagnetic read/write heads to get in any kind of contact with the platter i.e. disk surface or other

read/write heads. Also, with some basic procedures and short training, it is possible to let junior data recovery technicians handle complex tasks. With the development of these tools,we are trying to eliminate the element of luck which usually accompanies the process of datarecovery.

Experienced data recovery technicians or engineers can have great success even without our tools, but they can have absolute security only when using HDDLAB tools.Non-contact head replacement implies that there is no contact between the heads, or between heads and platters in the process of dismounting the donor heads and mounting

heads on the patient drive. Traditional techniques of replacing the heads imply contact between the heads and contact of heads with the platters in data area. These problems especially come to light on drives that have suffered some form of physical damage.These tools do not solve the head compatibility problem. They will only assure that the head replacement goes easily.

Daily storage and Handling the tools

When not in use, the tools should always be kept in a Iron box delivered with the tools. This way of keeping the tools prevents any possible damage which could appear when not handled properly.

While taking the tool out of the box, always hold it for the shank. Never hold the tool in the part where the head lifting snouts are.

Due to the sensitivity of hard drive platters to dust and any kind of contamination, be sure to clean the tools before their use. Tools can be cleaned with a piece of cotton wool and alcohol. When cleaning the head lifting snouts, be extremely gentle.


Hddlab Sea 2.5”Slim Set Tools.pdf


站点统计